焊工工作服的標準與要求，在GB9448-88《焊接與切割》中4.2.2條有如下要求：

　　The standards and requirements for welding uniforms are as follows in Article 4.2.2 of GB9448-88 "Welding and Cutting Safety":

　　4.2.2.1 焊工工作服應根據焊接與工作的特點選用。

　　4.2.2.1 Welder work clothes should be selected according to the characteristics of welding and work.

　　4.2.2.2 棉帆布工作服廣泛用于一般焊接、切割工作，工作服顏色為白色。選用面上有一種阻燃布的白色工作服。

　　4.2.2.2 Cotton canvas workwear is widely used for general welding and cutting work, and the color of the workwear is white. It is recommended to choose white work clothes with a flame-retardant fabric on the surface.

　　4.2.2.3 氣體保護焊在紫外線作用下，在產生臭氧等氣體時，應選用粗毛呢或皮革等面料制成的工作服，以防焊工在操作中被燙傷或體溫增高。

　　4.2.2.3 When gas shielded welding generates ozone and other gases under the action of ultraviolet radiation, work clothes made of coarse woolen or leather fabrics should be selected to prevent the welder from being burned or experiencing an increase in body temperature during operation.

　　4.2.2.4 從事全位置焊接的焊工應配制皮鞋工作服。

　　4.2.2.4 Welders engaged in all position welding should be equipped with leather shoe work clothes.

　　4.2.2.5 在仰焊、切割時，為防止火星、溶渣從高處濺落到頭部和肩上，焊工應在頸部圍毛巾、穿著用防燃材料制成的護肩、長袖套、圍裙和鞋蓋等。

　　During overhead welding and cutting, in order to prevent sparks and slag from splashing onto the head and shoulders from high places, welders should wrap a towel around their neck, wear shoulder protection made of flame-retardant materials, long sleeved covers, aprons, and shoe covers.

　　4.2.2.6 焊工穿用的工作服不應潮濕、工作服的口袋應有袋蓋，上身應遮住腰部，褲長應罩住鞋面。工作服上不應有破損、孔洞和縫隙，不允許沾有油脂。

　　4.2.2.6 The work clothes worn by welders should not be damp, and the pockets of the work clothes should have bag covers. The upper body should cover the waist, and the length of the pants should cover the shoe upper. There should be no damage, holes, or gaps on the work clothes, and no oil or grease is allowed to adhere to them.

　　4.2.2.7 焊接與切割作業的工作服，不能用一般合成纖維物做成。

　　Work clothes for welding and cutting operations cannot be made of general synthetic fiber materials.

　　擴展資料：

　　Additional Information:

　　電焊工電焊作業的防護措施又有哪些方面：

　　What are the safety protection measures for welders during welding operations

　　1、要說的就是焊工必須穿戴好電焊工作服，絕緣的鞋子及其絕緣的手套;

　　1. The first thing to say is that welders must wear welding work clothes, insulated shoes, and insulated gloves;

　　2、焊接時，強大的電弧光形成了大量的紫外線，紅外線，對人眼有刺激的作用，因而，焊接時應當拿好電焊防護罩，防護罩帶有濾光鏡片，防止與電弧光的直視;

　　2. During welding, the powerful arc light generates a large amount of ultraviolet and infrared radiation, which can be irritating to the human eye. Therefore, it is necessary to hold a welding protective cover with a filter lens to prevent direct contact with the arc light;

　　3、做好防觸電措施，及時檢測電焊設備和電焊線;

　　3. Take measures to prevent electric shock and promptly inspect welding equipment and wires;

　　4、焊接時，戴好口罩，以防有害氣體，灰塵的吸入。

　　4. When welding, wear a mask to prevent the inhalation of harmful gases and dust.

　　1、電焊專用的防護工作服、手套和皮鞋。

　　1. Protective work clothes, gloves, and leather shoes specifically designed for welding.

　　2、焊工作業時必須穿絕緣鞋、戴專用絕緣手套。

　　2. Welders must wear insulated shoes and specialized insulated gloves during their work.

　　3、焊接時，焊工及周圍其他人員應配戴防塵毒口罩，減少煙塵吸入體內。

　　3. During welding, welders and other personnel around should wear dust masks to reduce the inhalation of smoke and dust into their bodies.

　　4、焊接時焊工及周圍作業人員應穿戴好勞保用品。禁止不戴電焊面罩、不戴有色睛鏡直接觀察電弧光;盡可能減少皮膚外露，夏天禁止穿短褲和短褂從事電焊作業;有條件的可對外露的皮膚涂抹紫外線防護膏。

　　4. Welders and surrounding workers should wear personal protective equipment during welding. It is prohibited to observe the arc light directly without wearing a welding mask or colored goggles; Minimize skin exposure as much as possible, and prohibit wearing shorts and short coats for welding operations in summer; If conditions permit, apply UV protective cream to exposed skin.

　　擴展閱讀：

　　Extended reading:

　　電焊服具耐磨﹑隔熱和防火性能;

　　Wear resistance, thermal insulation, and fire resistance of welding equipment;

　　受力部位均采用雙層皮及鍋釘加固結構，提供高度作業環境;

　　The key load-bearing areas are reinforced with double-layer leather and pot nails, providing a highly safe working environment;

　　配有可調魔術貼的可翻式直立衣領，可阻擋燒焊飛濺物;

　　Equipped with adjustable Velcro, the reversible upright collar can block welding spatter;

　　肩部置有護縫條，加強耐用度。

　　There are seam protectors placed on the shoulders to enhance durability.

　　防火阻燃的棉質衣領、舒適又吸汗。手袖上部和肩位有內里，方便穿卸。

　　Fireproof and flame-retardant cotton collar is safe, comfortable, and sweat absorbent. The upper part of the sleeves and shoulders have lining for easy on and off.

　　電焊服前胸防護皮條設計可防止燒焊飛濺物濺入衣內，雙層皮及鍋釘加固結構，防止撕脫。

　　The design of the front chest protective leather strip of the welding suit can prevent welding spatter from splashing into the clothes, and the double-layer leather and pot nail reinforcement structure can prevent tearing off.

　　【健康性】通過Oeko-Tex standard 100嚴格檢測，保證焊工的使用。

　　【 Health and Safety 】 Through strict testing according to Oeko Tex standard 100, the safety of welders is ensured.

　　【勞作性】面料強度高、耐撕破、耐拉伸、耐摩擦。

　　【 Labor Safety 】 The fabric has high strength, tear resistance, stretch resistance, and friction resistance.

　　【舒適性】精選符合Oeko-Tex Standard的染料，確保服裝中不含對人體有害的物質。

　　【 Comfort 】 Selected dyes that meet Oeko Tex standards ensure that clothing does not contain harmful substances to the human body.

　　【適體性】服裝具有適應穿著者動作和生活的性能。符合人體工程學的設計。

　　Clothing has the ability to adapt to the movements and daily life of the wearer. Ergonomic design.

　　【阻燃性/拒油拒水】適用于偶爾接觸到火花、高溫金屬殘渣等場所環境中所穿，耐久性阻燃。

　　【 Flame retardant/oil and water repellent 】 Suitable for wearing in environments with occasional contact with sparks, high-temperature metal residues, etc., durable flame retardant.

　　【洗滌特點】可耐洗50次，不可漂白，可機洗、可工業洗滌。

　　[Washing characteristics] It can withstand 50 washes, cannot bleach, can be machine washed, and can be industrial washed.

　　【警示語】不適用于消防救援

　　[Warning] Not applicable to firefighting and rescue operations